The food additive fast green FCF inhibits α-synuclein aggregation, disassembles mature fibrils and protects against amyloid-induced neurotoxicity.

α-Synuclein (α-syn) aggregates into cytotoxic amyloid fibrils, which are recognized as the defining neuropathological feature of Parkinson's disease (PD). Therefore, inhibiting α-syn fibrillogenesis and disrupting the preformed fibrils are both considered attractive strategies to cure PD. We discovered that a safe food additive, fast green FCF, is capable of inhibiting α-synuclein fibrillogenesis and reducing the related cytotoxicity. Thioflavin T fluorescence assays demonstrated that fast green FCF could inhibit the fibrillogenesis α-synuclein. In the presence of 100 µM fast green FCF, amorphous aggregates were formed and observed by atomic force microscopy. Toxicity assays in cell cultures revealed that fast green FCF significantly reduced the cytotoxicity of α-syn. Molecular dynamics simulations revealed the potential mechanism of the interactions between fast green FCF and α-synuclein. Fast green FCF greatly disrupted the α-synuclein pentamer and reduced the ß-sheet content by reducing both nonpolar and polar interactions. Furthermore, two binding sites were identified, named region I (Y39-K45) and region II (H50-Q62). Our data reveal that electrostatic interactions, hydrogen bonds, and π-π interactions synergistically contribute to the binding of fast green FCF to the α-synuclein pentamer. These results indicate that fast green FCF is a candidate prototype for the development of drugs against the aggregation of amyloid fibrils in PD.

Reactive Green 5-Decorated Polyacrylamide/Chitosan Cryogel: An Affinity Matrix for Catalase.

Acrylamide/chitosan-based cryogel was fabricated, and a triazine dye, Reactive Green 5, was attached to the cryogel by nucleophilic substitution to build a dye affinity support for adsorption of catalase enzyme. Characterization of cryogel was performed using FTIR, SEM, EDX, BET, and swelling test. Synthesized cryogel beared pores with ~ 200 µm in size and the surface area of 11.8 m2/g. Maximum catalase adsorption was (17.6 ± 0.29 mg/g) measured at pH 4.0 and 25 °C. The adsorption sites on the cryogel were saturated at 0.75 mg/mL enzyme concentration. Increased ionic strength caused a decrease in adsorption capacity. Desorption of catalase from cryogel was enabled using 0.5 M NaSCN solution. Consecutive adsorption experiments were carried out fifteen times to evaluate the reusability of the cryogel. Thermal, storage, and operational stabilities of immobilized catalase were higher than the free one. The data produced implicate that catalase-adsorbed dye-affinity cryogel may be used for H2O2 detection or removal when necessary. Graphical Abstract.

Foam Separation of Dyes Using Anionic, Cationic, and Amphoteric Surfactants.

Foam separation can selectively remove a target substance from a solution via adsorption of the substance with the surfactant at the surface of the bubble. A cationic dye, methylene blue, and an anionic dye, Fast Green FCF, were prepared as substances to be removed via foam separation. Anionic (sodium dodecyl sulfate, SDS), cationic (dodecyltrimethylammonium chloride, DTAC), and amphoteric (3-(dodecyldimethylammonio)propane-1-sulfonate, SB-12) surfactants were used in the foam separation process. The effectiveness of the surfactants for removing the cationic methylene blue increased as follows: DTAC < SB-12 < SDS. On the other hand, the effectiveness of the surfactants for removing the anionic Fast Green FCF was in the opposite order. The dyes were effectively adsorbed by the foams via electrostatic interactions between the oppositely charged surfactant and the dye molecules. Since amphoteric surfactants have both anionic and cationic charges in a molecule, they could effectively remove both dyes in the foam separation process. Therefore, it was found that the amphoteric surfactant was highly versatile. Analysis of the kinetics of the removal rate showed that the aqueous solutions of monomers could remove the dyes more effectively than micellar solutions in foam separation.

Nanomolar Potency Aminophenyltriazine CFTR Activator Reverses Corneal Epithelial Injury in a Mouse Model of Dry Eye.

Purpose: Dry eye disorders are a major health care burden. We previously reported the identification of N-methyl-N-phenyl-6-(2,2,3,3-tetrafluoropropoxy)-1,3,5-triazine-2,4-diamine [cystic fibrosis transmembrane conductance regulator (CFTR)act-K267], which activated human wild-type CFTR chloride conductance with EC50 ∼ 30 nM. Here, we report in vivo evidence for CFTRact-K267 efficacy in an experimental mouse model of dry eye using a human compatible ophthalmic vehicle. Methods: CFTR activation in mice in vivo was demonstrated by ocular surface potential difference (OSPD) measurements. Ocular surface pharmacodynamics was measured in tear fluid samples obtained at different times after topical administration of CFTRact-K267. Dry eye was produced by lacrimal duct cautery (LDC) and corneal epithelial injury and was assessed by Lissamine green (LG) staining. Results: OSPD measurements demonstrated a hyperpolarization of -8.6 ± 3 mV (standard error of the mean, 5 mice) in response to CFTRact-K267 exposure in low chloride solution that was reversed by a CFTR inhibitor. Following single-dose topical administration of 2 nmol CFTRact-K267, tear fluid CFTRact-K267 concentration was >500 nM for more than 6 h. Following LDC, corneal surface epithelial injury, as assessed by LG staining, was substantially reversed in 10 of 12 eyes receiving 2 nmol CFTRact-K267 3 times daily starting on day 2, when marked epithelial injury had already occurred. Improvement was seen in 3 of 12 vehicle-treated eyes. Conclusion: These studies provide in vivo evidence in mice for the efficacy of a topical, human use compatible CFTRact-K267 formulation in stimulating chloride secretion and reversing corneal epithelial injury in dry eye.

Modified Biosensor for Cholinesterase Inhibitors with Guinea Green B as the Color Indicator.

Colorimetric biosensors of cholinesterase inhibitors are ideal for fast, reliable, and very simple detection of agents in air, in water, and on surfaces. This paper describes an innovation of the Czech Detehit biosensor, which is based on a biochemical enzymatic reaction visualized by using Ellman's reagent as a chromogenic indicator. The modification basically consists of a much more distinct color response of the biosensor, attained through optimization of the reaction system by using Guinea Green B as the indicator. The performance of the modified biosensor was verified on the chemical warfare agents (sarin, soman, cyclosarin, and VX) in water. The detection limits ascertained visually (with the naked eye) were about 0.001 µg/mL in water (exposure time 60 s, inhibition efficiency 25%).

Removal of Fast Green FCF dye from aqueous solutions using Flower Gel as a low-cost adsorbent.

The purpose of this study was to investigate the removal of Fast Green FCF dye from aqueous solutions using Flower Gel in a batch adsorption process. The effect of different parameters such as pH, contact time, adsorbent dosage, stirrer speed and temperature were studied, and various isotherms including Langmuir, Freundlich and Tempkin were applied. The adsorbent characteristics were determined by microscopic analysis, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction and ultraviolet-visible (UV-vis) spectrophotometry. The results showed that the equilibrium experimental data fitted well to the Langmuir isotherm and the maximum adsorption capacity for this adsorbent was 58.82 mg/g. The adsorption kinetic data followed the pseudo-second-order kinetic model and the thermodynamic parameters of the adsorption, such as Gibbs free energy (ΔG°), enthalpy (ΔH°) and entropy (ΔS°), showed that the Fast Green FCF adsorption process by Flower Gel was spontaneous and exothermic in nature.

Examining the inhibitory potency of food additive fast green FCF against amyloid fibrillogenesis under acidic conditions.

More than thirty human proteins and/or peptides can fold incorrectly to form amyloid deposits associated with several protein aggregation diseases. No cure is currently available for treating these diseases. This work is aimed at examining the inhibitory potency of fast green FCF, a biocompatible dye, toward the fibrillogenesis/aggregation of lysozyme. As verified by ThT binding assay along with transmission electron microscopy, fast green FCF was observed to suppress the generation of lysozyme fibrils in a concentration-dependent manner. We next used circular dichroism absorption spectroscopy, ANS fluorescence spectroscopy, and SDS-PAGE to characterize the structural alterations in lysozyme samples upon the addition of fast green FCF. Furthermore, experiments with the addition of fast green FCF at different time points of incubation showed that fast green FCF also exhibited disaggregating activity against the preformed/existing lysozyme fibrils. We believe that the results from this study suggest a potential therapeutic role of biocompatible molecules in treating or preventing protein aggregation diseases.

Electrodegradation of the Acid Green 28 dye using Ti/ß-PbO2 and Ti-Pt/ß-PbO2 anodes.

The statistical Response Surface Methodology (RSM) is applied to investigate the effect of different parameters (current density, j, NaCl concentration, [NaCl], pH, and temperature, θ) and their interactions on the electrochemical degradation of the Acid Green (AG) 28 dye using a Ti/ß-PbO2 or Ti-Pt/ß-PbO2 anode in a filter-press reactor. LC/MS is employed to identify intermediate compounds. For both anodes, the best experimental conditions are j = 50 mA cm(-2), [NaCl] = 1.5 g L(-1), pH = 5, and θ = 25 °C. After 3 h of electrolysis, a dye solution treated under these conditions presents the following parameters: electric charge per unit volume of the electrolyzed solution required for 90% decolorization (Q(90)) of 0.34-0.37 A h L(-1), %COD removal of ∼100%, specific energy consumption of 18-20 kW h m(-3), and %TOC removal of 32-33%. No loss of the ß-PbO2 film is observed during all the experiments. The ß-PbO2 films present excellent stability for solutions with pH ≥ 5 ([Pb(2+)] < 0.5 mg L(-1)). Chloroform is the only volatile organic halo compound present in the treated solution under those optimized conditions. Hydroxylated anthraquinone derivatives, aromatic chloramines, and naphthoquinones are formed during the electrolyses. The Ti/ß-PbO2 and Ti-Pt/ß-PbO2 anodes show significantly better performance than a commercial DSA anode for the electrochemical degradation of the AG 28 dye. The Ti/ß-PbO2 anode, prepared as described in this work, is an excellent option for the treatment of textile effluents because of its low cost of fabrication and good performance.

Non-invasive assessment of porcine oocyte quality by supravital staining of cumulus-oocyte complexes with lissamine green B.

We evaluated the usefulness of lissamine green B (LB) staining of cumulus-oocyte complexes (COC) as a non-invasive method of predicting maturational and developmental competence of slaughterhouse-derived porcine oocytes cultured in vitro. Cumulus cells of freshly aspirated COCs were evaluated either morphologically on the basis of thickness of cumulus cell layers, or stained with LB, which penetrates only non-viable cells. The extent of cumulus cell staining was taken as an inverse indicator of membrane integrity. The two methods of COC grading were then examined as predictors of nuclear maturation and development after parthenogenetic activation. In both cases LB staining proved a more reliable indicator than morphological assessment (P < 0.05). The relationship between LB staining and cumulus cell apoptosis was also examined. Terminal deoxynucleotidyl transferase dUTP nick end labeling (TUNEL) assay for DNA fragmentation revealed that oocytes within COCs graded as low quality by either LB staining or visual morphology showed significantly greater DNA fragmentation (P < 0.05) than higher grades, and that LB and visual grading were of similar predictive value. Expression of the stress response gene TP53 showed significantly higher expression in COCs graded as low quality by LB staining. However expression of the apoptosis-associated genes BAK and CASP3 was not significantly different between high or low grade COCs, suggesting that mRNA expression of BAK and CASP3 is not a reliable method of detecting apoptosis in porcine COCs. Evaluation of cumulus cell membrane integrity by lissamine green B staining thus provides a useful new tool to gain information about the maturational and developmental competence of porcine oocytes.

Comparison of conjunctival staining between lissamine green and yellow filtered fluorescein sodium.

OBJECTIVE: To compare conjunctival staining between lissamine green and fluorescein sodium using a yellow barrier filter. DESIGN: Retrospective cross-sectional study. PARTICIPANTS: Thirteen eyes of 13 patients with dry eyes. METHODS: All patients underwent ocular surface staining with fluorescein sodium and lissamine green. Ocular surface staining with fluorescein sodium was observed through slit-lamp examination under cobalt blue illumination and a yellow filter. Temporal (0-5) and nasal (0-5) conjunctival staining grade was separately graded according to the Oxford scheme. The contrast score was defined as the absolute difference between mean grey values of punctate staining and background. Conjunctival staining grade and contrast scores were compared between these 2 staining methods. RESULTS: The sum of the conjunctival staining grade (0-10) for the nasal and temporal conjunctiva was 4.7 ± 2.5 for fluorescein sodium, which was significantly higher than that of lissamine green, 4.1 ± 2.5 (p = 0.005). The contrast score of temporal and nasal conjunctival staining was 34.6 ± 12.0 and 34.7 ± 10.3, respectively, for fluorescein sodium, which was also significantly greater than for lissamine green (23.4 ± 8.1 and 21.0 ± 9.0, respectively; p = 0.003 and p = 0.003, respectively). CONCLUSIONS: Conjunctival staining with fluorescein sodium and a yellow filter seems to be more sensitive for the detection of conjunctival damage than lissamine green. Fluorescein staining with the yellow filter has the advantage of simultaneous observation of both corneal and conjunctival damage in patients with dry eye without the need for additional vital staining.

Ocular Surface Alterations and In Vivo Confocal Microscopic Features of Corneas in Patients With Newly Diagnosed Graves' Disease.

PURPOSE: To evaluate the ocular surface characteristics and corneal microstructure in patients with newly diagnosed Graves disease (GD) with no evidence of active thyroid eye disease (TED). METHODS: Eighty eyes of 40 patients with newly diagnosed GD and 40 age-matched control subjects were recruited in this cross-sectional study. All participants underwent ocular surface tests in the order of tear break-up time (BUT), lissamine green (LG) staining, Schirmer I test with anesthesia, and ocular surface disease index (OSDI) questionnaire. Basal epithelial cell, keratocyte, and endothelial cell densities and subbasal nerves were evaluated using in vivo confocal microscopy (IVCM). Independent sample t test, χ test, and Mann-Whitney U test were used for statistical analysis. RESULTS: Patients with GD had higher OSDI (5.9 ± 6.6 vs. 1.7 ± 2.4, respectively, P ≤ 0.001) and LG staining scores (0.5 ± 0.6 vs. 0.2 ± 0.4, respectively, P = 0.003), and lower BUT scores (7.3 ± 2.5 vs. 9.9 ± 1.7, respectively, P < 0.001) compared with those of control subjects. Patients with GD had lower mean basal epithelial cell density (3928 ± 657 cells/mm² vs. 4771 ± 622 cells/mm², respectively) and total subbasal nerve density (958 ± 394 cells/mm² vs. 1416 ± 744 cells/mm², respectively) and higher subbasal nerve tortuosity (2.7 ± 0.8 vs. 1.6 ± 0.6, respectively) compared with those of control subjects (P < 0.001). There was a statistically significant negative correlation between the duration of symptoms of hyperthyroidism and BUT (rho = -0.273, P = 0.014) and a positive correlation between LG staining scores (rho = 0.329, P = 0.003). A significant reduction in BUT (rho = -0.238, P = 0.003) and epithelial cell density (rho = -0.174, P = 0.029) and an increase in OSDI scores (rho = 0.328, P = 0.003) were found with increasing exophthalmometry measurements. CONCLUSIONS: Ocular surface alterations begin early in the course of Graves disease before the onset of overt TED.

Long-term Supplementation With n-6 and n-3 PUFAs Improves Moderate-to-Severe Keratoconjunctivitis Sicca: A Randomized Double-Blind Clinical Trial.

PURPOSE: Supplementation with gamma-linolenic acid (GLA) and omega-3 (n-3) polyunsaturated fatty acids (PUFAs) has been found to decrease the production of disease-relevant inflammatory mediators that are implicated in the pathogenesis of chronic dry eye. This study evaluated the effect of a supplement containing both GLA and n-3 PUFAs on signs and symptoms of moderate-to-severe keratoconjunctivitis sicca in postmenopausal patients. METHODS: This multicenter, double-masked placebo-controlled clinical trial enrolled 38 patients (both eyes) with tear dysfunction who were randomized to supplemental GLA + n-3 PUFAs or placebo for 6 months. Disease parameters, including Ocular Surface Disease Index, Schirmer test, tear breakup time, conjunctival fluorescein and lissamine green staining, and topographic corneal smoothness indexes (surface asymmetry index and surface regularity index), were assessed at baseline and at 4, 12, and 24 weeks. The intensity of dendritic cell CD11c integrin and HLA-DR expression was measured in conjunctival impression cytologies. RESULTS: The Ocular Surface Disease Index score improved with supplementation and was significantly lower than placebo (21 ± 4 vs. 34 ± 5) after 24 weeks (P = 0.05, n = 19 per group). The surface asymmetry index was significantly lower in supplement-treated subjects (0.37 ± 0.03, n = 15) than placebo (0.51 ± 0.03, n = 16) at 24 weeks (P = 0.005). Placebo treatment also significantly increased HLA-DR intensity by 36% ± 9% and CD11c by 34% ± 7% when compared with supplement treatment (n = 19 per group, P = 0.001, 24 weeks). Neither treatment had any effect on tear production, tear breakup time, or corneal or conjunctival staining. CONCLUSIONS: Supplemental GLA and n-3 PUFAs for 6 months improved ocular irritation symptoms, maintained corneal surface smoothness, and inhibited conjunctival dendritic cell maturation in patients with postmenopausal keratoconjunctivitis sicca.Clinical Trial Registration-URL: http://www.clinicaltrials.gov. Unique identifier: NCT00883649.

Electro-Fenton decolourisation of dyes in an airlift continuous reactor using iron alginate beads.

In this study, electro-Fenton dye degradation was performed in an airlift continuous reactor configuration by harnessing the catalytic activity of Fe alginate gel beads. Electro-Fenton experiments were carried out in an airlift reactor with a working volume of 1.5 L, air flow of 1.5 L/min and 115 g of Fe alginate gel beads. An electric field was applied by two graphite bars connected to a direct current power supply with a constant potential drop. In this study, Lissamine Green B and Reactive Black 5 were selected as model dyes. Fe alginate gel beads can be used as an effective heterogeneous catalyst for the degradation of organic dyes in the electro-Fenton process, as they are more efficient than the conventional electrochemical techniques. At optimal working conditions (3 V and pH 2), the continuous process was performed. For both dyes, the degree of decolourisation increases when the residence time augments. Taking into account hydrodynamic and kinetic behaviour, a model to describe the reactor profile was obtained, and the standard deviation between experimental and theoretical data was lower than 6%. The results indicate the suitability of the electro-Fenton technique to oxidise polluted effluents in the presence of Fe alginate gel beads. Moreover, the operation is possible in a continuous airlift reactor, due to the entrapment of iron in the alginate matrix.

Purification of papain using reactive green 5 attached supermacroporous monolithic cryogel.

Supermacroporous poly(2-hydroxyethyl methacrylate) [poly(HEMA)] monolithic cryogel was prepared by radical cryocopolymerization of HEMA with N,N'-methylene bisacrylamide as crosslinker. Reactive Green 5 dye was immobilized to the cryogel with nucleophilic substitution reaction, and this dye attached cryogel column was used for affinity purification of papain from Carica papaya latex. Reactive Green 5-immobilized poly(HEMA) cryogel was characterized by swelling studies, Fourier transform infrared spectroscopy, scanning electron microscopy, and energy dispersive X-ray analysis. Maximum papain adsorption capacity was found to be 68.5 mg/g polymer while nonspecific papain adsorption onto plain cryogel was negligible (3.07 mg/g polymer). Papain from C. papaya was purified 42-fold in single step with dye attached cryogel, and purity of papain was shown by silver-stained sodium dodecyl sulfate-polyacrylamide gel electrophoresis.

Decolourisation of dyes under electro-Fenton process using Fe alginate gel beads.

This study focuses on the application of electro-Fenton technique by use of catalytic activity of Fe alginate gel beads for the remediation of wastewater contaminated with synthetic dyes. The Fe alginate gel beads were evaluated for decolourisation of two typical dyes, Lissamine Green B and Azure B under electro-Fenton process. After characterization of Fe alginate gel beads, the pH effect on the process with Fe alginate beads and a comparative study of the electro-Fenton process with free Fe and Fe alginate bead was done. The results showed that the use of Fe alginate beads increases the efficiency of the process; moreover the developed particles show a physical integrity in a wide range of pH (2-8). Around 98-100% of dye decolourisation was obtained for both dyes by electro-Fenton process in successive batches. Therefore, the process was performed with Fe alginate beads in a bubble continuous reactor. High color removal (87-98%) was attained for both dyes operating at a residence time of 30 min, without operational problems and maintaining particle shapes throughout the oxidation process. Consequently, the stable performance of Fe alginate beads opens promising perspectives for fast and economical treatment of wastewater polluted by dyes or similar organic contaminants.

Rapid detection of ciprofloxacin effects on Fusarium graminearum and F. avenaceum cells in modulating environmental pH using a reactive, non-toxic food-dye indicator.

The objective of the study was to assess the effect of ciprofloxacin antibiotic on the physiological or phenotypic characteristics of food-borne toxigenic Fusarium graminearum and F. avenaceum molds under in vitro conditions. In the presence of ciprofloxacin, Fusarium mycelia growth and morphology were altered based on the antibiotic concentration range used. Results showed that ciprofloxacin in concentrations ≥40µg/mL induced chlamydospore formation in Fusaria and as such, this antibiotic should be considered as an important abiotic stress factor and growth inhibitor. A novel method was investigated to correlate chlamydospore formation with the colour changes observed in FD&C Green Number 3, a common water soluble food dye. The antibiotic-treated F. graminearum and F. avenaceum isolates produced chamydospores, which in turn altered environmental pH with concomitant changes in the colour and intensity of the dye. The colour changes observed as a function of environmental pH were supported by instrumental methods (pH meter and spectroscopy), and a commercial pH indicator (thymol blue) results. In conclusion, we propose that FD&C Green Number 3 can be used as an accurate indicator for the rapid assessment of Fusarium molds when grown on ciprofloxacin antibiotic-containing substrate. Special emphasis should be given to an indirect risk assessment of antibiotic effects on toxic molds.

Behaviors and mechanism of acid dyes sorption onto diethylenetriamine-modified native and enzymatic hydrolysis starch.

In this paper, different starches were modified by diethylenetriamine. The native starch reacted with diethylenetriamine giving CAS, whereas the enzymatic hydrolysis starch was modified by diethylenetriamine producing CAES. Adsorption capacities of CAES for four acid dyes, namely, Acid orange 7 (AO7), Acid orange 10 (AO10), Acid green 25 (AG25) and Acid red 18 (AR18) have been determined to be 2.521, 1.242, 1.798 and 1.570 mmol g(-1), respectively. In all cases, CAES has exhibited higher sorption ability than CAS, and the increment for these dyes took the sequence of AO7 (0.944 mmol g(-1))>AO10 (0.592 mmol g(-1))>AR18 (0.411 mmol g(-1))>AG25 (0.047 mmol g(-1)). Sorption kinetics and isotherms analysis showed that these sorption processes were better fitted to pseudo-second-order equation and Langmuir equation. Chemical sorption mechanisms were confirmed by studying the effects of pH, ionic strength and hydrogen bonding. Thermodynamic parameters of these dyes onto CAES and CAS were also observed and it indicated that these sorption processes were exothermic and spontaneous in nature.

Optimization for decolorization of azo dye acid green 20 by ultrasound and H2O2 using response surface methodology.

Response surface methodology (RSM) based on Box-Behnken design was successfully applied to the optimization of the operating conditions in decolorization of acid green 20 (AG 20) by ultrasonic irradiation in the presence of H(2)O(2). The effects of three operating variables, ultrasonic power density, initial pH value of dye solution and H(2)O(2) concentration on the decolorization efficiency of AG 20 were evaluated. A quadratic model for AG 20 decolorization was proposed. Analysis of variance (ANOVA) indicated that the proposed quadratic model could be used to navigate the design space. The proposed model was approximately in accordance with the experimental case with correlation coefficients R(2) and R(adj)(2) of 0.9995 and 0.9984, respectively. The optimum operating conditions for AG 20 decolorization were found to be 1.08 W/mL of ultrasonic power density, 4.85 of initial pH and 1.94 mM of H(2)O(2) concentration, respectively. The predicted decolorization rate under the optimum conditions determined by RSM was 96.8%. Confirmatory tests were carried out under the optimum conditions and the decolorization rate of 96.3% was observed, which closely agreed with the predicted value. The results confirmed that RSM based on Box-Behnken design was an accurate and reliable method to optimize the operating conditions of AG 20 decolorization.

Quantitation of protein on gels and blots by infrared fluorescence of Coomassie blue and Fast Green.

Coomassie blue staining of gels and blots is commonly employed for detection and quantitation of proteins by densitometry. We found that Coomassie blue or Fast Green FCF bound to protein fluoresces in the near infrared. We took advantage of this property to develop a rapid and sensitive method for detection and quantitation of proteins in gels and on blots. The fluorescence response is quantitative for protein content between 10 ng and 20 microg per band or spot. Staining and destaining require only 30 min, and the method is compatible with subsequent immunodetection.